What NVMe drive does the PS5 need?

The PS5 needs a PCIe Gen4 M.2 NVMe SSD with sequential read speeds of at least 5,500 MB/s and a heatsink that fits the slot. Most decent Gen4 drives meet the speed bar; just make sure it has cooling and fits.

Do I need an expensive SSD for the PS5?

No. The cheapest Gen4 drive that hits the 5,500 MB/s read requirement and has a heatsink works perfectly. Paying for top-tier gen 5 speed is wasted money on a PS5. The live table shows the best value options.

Does a PS5 SSD need a heatsink?

Yes. Sony requires adequate cooling. Buy a drive with a heatsink already fitted, or add a low-profile M.2 heatsink that fits within the console's slot dimensions.

What's the Best Budget NVMe SSD for PS5 Storage?

Published: July 8, 2026

Live answer · Amazon.com

Pulling live prices…

📊 As of August 25, 2026, the typical NVMe SSD (1TB+) on Amazon.com is $200/TB or $0.20/GB, widest choice around $170/TB, with some as cheap as $110/TB across 1193 live listings.

Sourced from real discussions on r/PS5 and r/buildapc, cross-checked against live PricePerGig listings.

For your PS5 you need an M.2 NVMe Gen 4 drive with a read speed at or above 5,500 MB/s, with a little heatsink. Whatever you do, don’t accidentally get a SATA drive or an older Gen3; you can get a Gen5 if you like wasting money.

The table above shows live NVMe prices on your marketplace, and a budget Gen4 drive that meets the spec is all you need.

The exact specs your PS5 needs

Do not buy blind. The PS5 has clear requirements, and most affordable Gen4 drives meet them.

PCIe Gen4 M.2 NVMe. Not Gen3, not SATA.
Sequential read of at least 5,500 MB/s. Most Gen4 drives clear this easily.
A heatsink that fits the slot, because Sony requires cooling.
M.2 2280 size for the best fit, though a few other lengths work.

Hit those four and the console is happy. You do not need to spend a penny more.

Why you should not overspend

Here is where people waste money on a PS5 upgrade.

They see a screaming fast premium drive and assume faster is better.

It is not, not here.

The PS5 caps how fast it reads from the drive, so a 7,000 MB/s drive and a 12,000 MB/s gen 5 monster load games at basically the same speed in the console. The extra speed is wasted.

So the smart buy is the cheapest drive that clears 5,500 MB/s with a heatsink. Simple.

Heatsink: fitted or add your own

The one spec people forget is cooling.

You have two easy options.

Buy a drive with a heatsink already attached and sized for the PS5. Easiest path.
Buy a bare drive plus a low profile M.2 heatsink that fits the console slot. Often the cheapest path.

Either works. Just never run a bare drive with no cooling, because Sony asks for a reason.

How to pick the cheapest good one

The plan, start to finish.

Open the live table above and sort by price per TB.
Pick the cheapest Gen4 NVMe that hits 5,500 MB/s read and is M.2 2280.
Make sure it has a heatsink or buy a cheap one to add.
Go 2TB if the price per TB is close, because games are huge now.

That gets you maximum extra storage for minimum money, with zero wasted spend on speed the console ignores.

The bottom line

The best budget NVMe for a PS5 is the cheapest Gen4 drive that clears 5,500 MB/s, fits M.2 2280, and has a heatsink.

Ignore the premium gen 5 drives, since the console cannot use that speed anyway. Use the live table above to find the best price per TB that meets the spec, add cooling if needed, and enjoy a PS5 that finally has room for your games again.

The Price Per Gig dataset has speed data where available, so you can check out all the NVMe drives with a speed over 5,500.

The exact specs your PS5 needs

Why you should not overspend

Heatsink: fitted or add your own

How to pick the cheapest good one

The bottom line

Related questions